| |
MATERIAL
DE MICROSCOPIA ELECTRÓNICA: Limpiadores de Ultrasonidos 
| Ultrasonic
Cleaner, Model 1510:
Tank Size: 139.7 x 152.4 x
101.6mm (5.5 x 6 x 4")
Overall Size: 254 x 304.8 x 292mm (10 x12x 11.5" )
Tank Capacity:1.91L (1/2 gal.); Weight: 3.18kg (7lbs.) Frequency:
40kHz. Cover included |
Ultrasonic
Cleaner, Model 2510
Tank Size: 241.3
x139.7x 101.6mm (9.5 x 5.5 x 4" )
Overall Size: 343 x 304.8 x 292mm (13.5 x 12 x 11.5").
Tank Capacity: 2.81L (3/4 gal.); Weight: 4.07kg (9 lbs.). Frequency:
40kHz. Cover included |
| Ultrasonic
Cleaner, Model 3510
Tank Size: 292.1 x 152.4 x
152.4mm (11.5 x 6 x 6")
Overall Size: 16 x 12 x 15.5" (406.4 x 304.8 x
368.3mm) Tank Capacity: 5.71L (1.5 gal.); Weight: 5.44kg
(12 lbs.) Frequency: 40kHz. Cover included |
Ultrasonic
Cleaner, Model 5510
Tank Size: 292.1 x 241.3 x
152.4mm (11.5 x 9.5 x 6"). Size: 406.4 x 393.7 x
368.3mm (16 x 15.5 x 14.5"). Tank Capacity: 11.37 (2.5
gallon) Weight: 6.34kg (14 lbs.) Frequency: 40kHz. Cover
included |
| Ultrasonic
Cleaner, B-5.
Smaller Cleaner. Furnished with
small parts holder. Approximately 50 watts (UL). Capacity:
0.47 liters (1 pint) Housing: 12.7 x 12.7 x 15.9cm (5 x 5 x
6-1/4") (L x W x H) Stainless tank: 7.6cm deep x 8.9cm
diameter (3 x 3-1/2")
Hint: If you run the cleaner for 1-2 minutes and allow
degassing of the cleaning solution before inserting parts, quicker
and more effective cleaning will occur. Warm water helps. |
Ultrasonic
Cleaner, Model B-200
With small parts holder.
Approximately 50 watts.
Capacity: 0.42 liters (15 oz.) Housing: 21.3 x 11.1
x 11.7cm (8-5/8 x 4-7/16 x 4-5/8") (L x W x D) Stainless
tank: 16.5 x 8.9 x 5.0cm) (6-1/2 x 3-1/2 x 2") (L x W x
D)
Useable dimensions within working basket: 15.9 x 8.3 x 42cm (6-1/4
x 3-1/4 x 1.65") (L x W x D).
Hint: If you run the cleaner for 1-2 minutes and allow
degassing of the cleaning solution before inserting parts, quicker
and more effective cleaning will occur. Warm water increases
efficiency |
| PELCO
Kleensonic WRS
PELCO Kleensonic™ WRS is an
environmentally friendly cleaning compound in powder form
formulated for removing mounting waxes used in specimen
preparation, semiconductor processing and casting. Needs to be
dissolved in water to make the cleaning solution. Primarily
designed to solve and remove waxes and oils, but Kleensonic™ WRS
can also be used to remove silicones, finishing compounds, soils
and greases. PELCO Kleensonic™ is compatible with parts or
products made from silicon, glass, iron, aluminum zinc, copper,
brass and magnesium. Highly recommended to use ultrasonic
agitation to enhance cleaning process and to reduce cleaning time.
Sold in container of 1 lb (makes 2.67 gallons).
Usage: 6 oz. (170grams) of powder concentrate in water makes 1
gallon (3.8ltr) of ultrasonic wax stripper solution, best working
temperature 50 - 70°C. |
PELCO
Kleensonic APC
PELCO Kleensonic™ APC is a
powerful liquid detergent for ultrasonic cleaning of
semiconductor, silicon, glass and electronic materials/parts. The
detergent formulation is of the multiple acting type with
especially good solvent action. It possesses high sequestering
ability, strong surface activity,good suspension and
emulsification properties. Surface contaminants normally resistant
to conventional detergents are readily removed. The balanced
product formulation maintains an effective hydrophylic-hydrophobic
balance. As a result of the effective detergent-water interface,
which penetrates around soils and surface contaminants, ultrasonic
action in cleaning is enhanced. Sold in bottle of 1 Qt. (makes 8
gallons) Usage: (32:1) 4 fluid oz. of concentrate in 1 gallon (3.8
ltr) of water. Can be used at room temperature or elevated
temperatures. The cleaning solution is readily rinsed off with
demineralized water |
| PELCO
Kleensonic CDC Powder Concentrate
PELCO Kleensonic™ CDC is a high
performance, heavy-duty ultrasonic yet environmentally friendly
cleaning powder. Fast acting, long lasting and saves costs, space
and time. It is easy to handle, completely biodegradable, odorless,
ammonia-free and non-flammable. PELCO Kleensonic™ CDC cleans and
degreases and can be used for removing oils, greases, fingerprints,
dust, packaging particulates, soils and buffing and polishing
compounds. It is safe to use on all types of metals, including
aluminum and magnesium (if rinsed promptly), glass, ceramics,
plastic and rubber components. Application examples are cleaning
of mechanical parts, electronic components and specimens after
grinding, lapping or polishing. Sold in container of 2 lbs (makes
75 gallons). Usage: (400:1) 1/3 oz. of powder concentrate in 1 gallon (3.8 ltr)
of water. Scoop is provided in container. Best results with warm
or hot water. Immerse parts and ultrasonicate for 1-5 minutes.
Rinse thoroughly in water after cleaning. |
Branson
Ultrasonic Cleaning Solutions
-
MC-1
Metal Cleaner, solution concentrate
-
JC
Jewelry Cleaner (soils, prints, gems, rings), 1 quart solution
concentrate
-
GP
General Purpose Cleaner Solution (soils, prints, tissue, light
oils), 1 quart solution concentrate
-
GP
General Purpose Cleaner Solution (soils, prints, tissue, light
oils), 1 quart solution concentrate
-
IS
Industrial Strength Cleaner (cutting oils, metal chips, grease,
carbon), gallon
-
OC
Optical Cleaner, 1 gallon
|
|
