| |
MATERIAL
DE MICROSCOPIA ELECTRÓNICA: Material de Inclusión 
|
|
|
| PELCO® Flat
Embedding Mold Alphanumeric self-impression cavities,
pretrimmed end, blue silicone rubber. Number of Cavities:
24. Numbering: A1- A6, B1-B6, C1-C6, D1-D6. Special
Cavities: 2 troughs - 1 x 3cm x 3mm deep 1 trough - 1 x 1.7cm
x 3mm deep. Mold Size: 105 x 70 x 7mm thick |
PELCO® Translucent
Flat Embedding Mold: Alphanumeric
self-impression cavities, pretrimmed end, clear silicone rubber.Number
of Cavities: 24. Numbering: A1- A6, B1-B6, C1-C6, D1-D6.
Special Cavities: 2 troughs - 10 x 39mm x 3mm deep 1 trough
- 1 x 1.7cm x 3mm deep. Mold Size: 105 x 70 x 7mm thick |
|
|
|
| PELCO® 20 Cavity
Embedding Mold: Consecutive
numbering, pretrimmed end, blue silicone rubber. Number
of Cavities: 20. Numbering: 1-20. Mold Size: 89
x 76 x 7mm thick |
21 Cavity EM
Embedding Mold: Single
pretrimmed end with consecutive numbering. Blue silicone rubber.
Number of Cavities: 21 Numbering:
1-21 Mold Size: 74 x 61 x 6mm thick |
|
|
|
| PELCO® Double-end
Mold: Pretrimmed double
ends for each cavity, doubling specimen capacity. Consecutive
numbering, blue silicone rubber.Number of Cavities: 24 Numbering:
1-24 Mold Size: 67 x 85 x 7mm thick |
Double End Mold: Double
pretrimmed ends, consecutive numbering, blue silicone rubber. Number
of Cavities: 21 Numbering: 1-21 Mold Size: 72 x
62 x 6mm thick |
 |
 |
| BEEM®
Capsules |
BEEM®
Conical Tip Capsules |
 |
 |
| BEEM®
Size 00 Capsule Holder |
BEEM®
Capsule Holder |
|
